High Q Notch Filter

Compartir:
A shows a twin-T network connected to an LM102 to form a high Q, 60 Hz notch filter. The junction of R3 and C3, which is normally connected to ground, is bootstrapped to the output of the follower. Because the output of the follower is a very low impedance, neither the depth nor the frequency of the notch change; however, the Q is raised in proportion to the amount of signal fed back to R3 and C3. B shows the response of a normal twin-T and the response with the follower added.

Click para ampliar
Compartir:

0 comments:

Publicar un comentario

High Q Notch Filter - Circuitos de Electronica

Buscar

Archivo del blog