Multiple Feedback Bandpass Filter

The op amp is connected in the inverting mode. Resistor R3 from the output to the inverting input sets the gain and current through the frequency-determining capacitor, C1. Capacitor C2 provides feedback from the output to the junction of R1 and R2. C1 and C2 are always equal in value. Resistor R2 may be made adjustable in order to adjust the center frequency which is determined from:


When designing a filter of this type it is best to select a value for C1 and C2, keeping them equal. Typical audio filters have capacitor values from 0.01 uF to 0.1 uF which will result in reasonable values for the resistors.

Click para ampliar
Multiple Feedback Bandpass Filter - Circuitos de Electronica