Simple Spectrum Analyzer Adapter For Scopes

Compartir:
Suitable for monitoring an amateur band or a segment of the radio spectrum, this simple adapter uses an NE602 mixer-oscillator chip to produces a 455-kHz IF signal, which U2 amplifies, then feeds to detector D2 and the Y axis of an oscilloscope. VT is used to drive the horizontal axis input of a scope. L2 and L3 are coils suitable for the frequency range in use. For this circuit, coils are shown for the 10- to 15-MHz range. L2 and L3 are wound on Amidon Associates, T-37 or T-50 toroidal cores, and L1 is a commercial or homemade variable inductor, etc.

Click para ampliar
Compartir:

0 comments:

Publicar un comentario

Simple Spectrum Analyzer Adapter For Scopes - Circuitos de Electronica

Buscar

Archivo del blog