Strobe Alarm

Compartir:
This strobe gives a visual indication of a sensor input. The input signal causes U1, a light dependent resistor, to charge C1 and C3 through R4. When NE1 fires, C3 discharges into SCR1, which triggers it and causes C2 to discharge through trigger transformer T1, which triggers Flashlamp FL1. The 330-V supply should have about 50 to 100 uF output capacitance. L1 supplies about 25-mH inductance to prolong the flash and the life of FL1.

Click para ampliar
Compartir:

0 comments:

Publicar un comentario

Strobe Alarm - Circuitos de Electronica

Buscar

Archivo del blog